For haircare and cosmetics
Custom Hair Serum Tags
Serum bottles are narrow, oily in handling and often glass, so the tag has to hang from a slim neck without slipping or marking.
- In stock online. Swing tags are configured and ordered online from one tag; briefs for several designs or very large runs can also be quoted through the Custom Tag Builder.
- Free UK delivery. Standard online orders are delivered free to one UK address.
- Free reprint or refund if faulty. Report faulty, damaged or incorrect tags within 30 days of delivery and we reprint them or refund you in full, with free return postage if a return is needed. Because every order is printed to your specification, change-of-mind returns are not accepted. Your statutory rights are not affected.
- Online orders arrive 2–6 working days after artwork approval
Order online
Customise your Hair Serum Tags
Choose the size, shape, card, printing, finish and quantity. The price updates as you change each option.
- Format
- Neck tag or small portrait
- Use
- Usage direction and ingredient claims
- Material
- Coated or water-resistant board
- Artwork
- Upload when ready
Description
Hair Serum Tags prices by quantity
Hair Serum Tags at 50 × 75mm on coated one side 350gsm card, printed full colour on one side, all-inclusive with free UK delivery. Other sizes, cards and finishes are repriced in the order panel; quantities in between pay the rate of the quantity below, and runs above 10,000 tags are quoted.
| Quantity | Price |
|---|---|
| 1 tag | £0.59 |
| 100 tags | £59.00 |
| 250 tags | £81.00 |
| 500 tags | £111.00 |
| 1,000 tags | £166.00 |
| 2,500 tags | £302.00 |
| 5,000 tags | £513.00 |
Haircare bottle tags
Hair serum tags for slim dropper and pump bottles
Hair serum tags hang from the narrow neck of a dropper or pump bottle, carrying application instructions, key ingredients, tester labels or gift messages. Serum bottles are often glass and oily to handle, so the tag has to sit securely without sliding off or marking.
A coated or laminated surface resists oil better than bare card, and an elastic loop grips a slim neck well. Give the neck diameter in your notes so the loop and hole size can be matched to the bottle.
Tag anatomy
Hair Serum Tags: parts of the tag
Hair Serum Tags start at 50 × 75mm on coated one side card. Each numbered part of the diagram is a choice you can change in the order panel.
- CardCoated one side, 250gsm to 1200gsm, with 4 other cards in the order panel.
- Front print areaLogo and brand name, printed full colour, in one to three colours or a Pantone match.
- Product detailsPrice, size, barcode, QR code or care notes, below the logo or on the back when the tag is printed on both sides.
- Bleed3mm of artwork past every trim edge, so colour runs cleanly to the cut.
- Hole and eyelet3mm drilled hole as standard, or 5mm with one of 4 metal eyelet colours.
- AttachmentChoose black lock string, white lock string, black elastic loop, white elastic loop and more, or no string.
Where this format fits
Hair Serum Tags uses
Application instructions
How much to use and on wet or dry hair is the question the tag answers at the point of purchase.
Active ingredient claims
Oils, percentages and actives justify the price, and the tag carries them where the bottle label runs out of room.
Tester and sample identification
Counter testers need marking as testers, and a tag does it without a sticker on the glass.
Gift and bundle presentation
A tag turns a single bottle into a giftable item without secondary packaging.
Additional information
Build the specification
Hair Serum Tags specification
- Hanging from a narrow neck
- Serum bottles have a slim neck and often a dropper collar, so the hole and cord have to be sized to sit above the shoulder without sliding down over the label.
- Oil and product contact
- Serum migrates onto whatever is nearest the cap. A coated or laminated face resists that staining where an uncoated board will mark permanently.
- Ingredient and usage copy
- Application instructions and key actives are the reason the tag exists, and both need more room than the brand name that usually gets designed first.
- Claims that have to be exact
- Percentages, actives and any regulated wording should be taken from the approved copy rather than re-typed into the artwork.
- Glass, weight and balance
- A heavy glass bottle with a light tag is fine; a heavy tag on a small bottle tips it. Check the tag weight against the filled bottle before settling the board.
- Batch and shelf life
- Where a batch or period-after-opening mark is printed on the tag rather than the bottle, confirm it with the quantity so the run is set up as variable.
Material, print and finish
Choose the details around the product
Hair Serum Tags format alone does not determine the finished hang tag. The card, print, finish and attachment should be chosen together with the product context and artwork.
- Stock: Coated and water-resistant boards suit haircare, because the tag will meet product residue at some point in its life.
- Lamination: A gloss or soft-touch laminate seals the surface against oil. Soft-touch also gives the tactile cue that the category trades on.
- Printing: Small ingredient type needs a surface that holds fine detail, which is the main argument for a coated sheet over an uncoated one here.
- Attachment: Fine cord or a narrow elastic loop suits a slim neck. Anything thick bunches under the dropper collar and sits badly.
Artwork and file guidance
Prepare the artwork
Plan the finished format before export
Keep the design compact and vertical so it hangs neatly against a slim bottle. Ingredients and instructions need a legible size, so move secondary copy to the back.
Leave a clear margin round the hole, as an elastic loop pulls on it each time the bottle is picked up.
Continue your research
Further swing tag guidance
Questions and answers
Questions before you order
Hair Serum Tags FAQs
Will serum stain the tag?
On uncoated board, yes, and permanently. A coated face or a laminate seals the surface so residue wipes off rather than soaking in, which is why haircare tags are rarely specified on uncoated stock.
How does a tag hang on a dropper bottle?
From a fine cord or narrow elastic loop sitting above the shoulder of the bottle. Thick twine bunches under the dropper collar and pushes the tag down over the label.
Is soft-touch lamination worth it here?
Often, yes. It seals the surface against product residue and gives the tactile finish the category is judged on, so it does two jobs at once rather than one.
Can the tag carry a batch code?
Yes. If the code changes through the run, supply it with the order as variable data so it is printed in a single production run rather than as separate short jobs.