Description
A product-specific format
Diamond Swing Tags for product presentation
Diamond Swing Tags give product teams a dedicated format for the information and presentation requirements of the item being sold. The specification should begin with the product it will be attached to, then account for the information the tag needs to carry.
Use the form to record the final size, card direction, print sides, finishing and attachment for diamond swing tags. This keeps the practical decisions together before artwork is supplied or confirmed.
Where this format fits
Diamond Swing Tags uses
Rotated square emphasis
A diamond is a square turned 45 degrees, which breaks a rail of upright rectangles without needing a new cutter shape.
Jewellery and luxury goods
The outline carries a gemstone association that suits jewellery, watches and premium accessories.
Warning and attention marks
A diamond reads as a signal shape, useful where the tag flags a restriction, allergen or handling note.
Corner-hung display
Hanging from a point puts the widest part of the tag at eye level rather than at the top.
Additional information
Build the specification
Diamond Swing Tags specification
The final diamond swing tags specification should be agreed from the product requirements, artwork and quantity—not guessed from a generic price table.
- Size and proportions
- A geometric outline narrows towards its points, so keep essential copy inside the widest part of the shape and treat the tips as decoration rather than usable artwork area.
- Card and surface
- Select the material and surface direction that suit handling, writing requirements and the planned artwork.
- Print and information
- Specify one or both sides and identify any barcode, variable information or mandatory copy.
- Hole and attachment
- Describe how the hang tag will attach to the product, including the preferred string, loop, ribbon or hardware.
- Finishing
- Discuss lamination, foil, Spot UV, embossing or other finishing only where it supports the artwork and use.
- Quantity and deadline
- Share the quantity and required date so the quote can be based on the real requirement.
Material, print and finish
Choose the details around the product
Diamond Swing Tags format alone does not determine the finished hang tag. The card, print, finish and attachment should be chosen together with the product context and artwork.
- Material: Compare available card directions before finalising the design.
- Printing: Plan the information that needs to appear on each side of the tag.
- Finishing: Use finishing options where they improve durability, contrast or brand presentation.
- Attachment: Match the attachment to the product, hole position and intended customer interaction.
Artwork and file guidance
Prepare the artwork
Plan the finished format before export
Keep essential diamond swing tags copy clear of the trim edge and attachment area. The page-specific artwork guidance explains the considerations for formats, holes, folds and variable product information.
If diamond swing tags artwork is not final, submit the product and specification details first. This gives the production conversation a clear starting point without forcing a premature file upload.
Continue your research
Further swing tag guidance
Questions and answers
Questions before you order
Diamond Swing Tags FAQs
How is a diamond tag different from a square?
The cut is the same; the difference is where the hole goes. Punching a corner turns a square into a diamond, which changes the whole visual weight of a display.
How much text fits on a diamond?
Less than the square it came from, because the usable rectangle sits inside the rotated outline. Short centred lines work; long lines run into the side points.
Do the points get damaged?
They are the first part to scuff, so a small radius on each point is worth adding unless the sharpness is the design.
Where should the hole sit?
Through the top point, with enough clearance that the remaining material does not tear when the tag swings.